LASER DESIGN SERVICES, LLC
LASER DESIGN SERVICES, LLC
JetCat P120 SE
JetCat P120 SE turbine complete with starter includes:
| # Jet-tronic ECU (fuel control electronics) # GSU (Display and Programmer) # LED I/O board # Miniature fuel pump # Electronic starting gas valve # Electronic Fuel valve # Fuel tubing, tubing connector set, filters, and cable set # 6 cell, 1250mA battery pack # Starting gas tank # Turbine mounting clamp, RamTec compatible # Detailed instruction manual |
Thrust: Thrust is 28 lbs @ 123,000 RPM
Weight: 3.1 LB
Diameter: 4.4 inches
RPM Range: 33,000 - 123,000 RPM
Exhaust gas temp.: 580°C-690°C
Fuel consumption: 12oz/min at full power
Fuel: Jet A1, 1-K kerosene
Lubrication: approximately 5% synthetic turbine oil in the fuel
Maintenance interval: 25 hours
P120 Thrust Chart
V4.0-5.0 ECU with a maximum of 123K RPM allowable in the limits menu. Thrust
33,000 1.0
82,000 9.5
90,000 12.0
92,500 13.0
98,500 15.0
103,500 17.0
105,500 18.0
111,000 20.0
115,000 22.0
119,000 24.0
121,000 26.0
123,000 28.0
The values are approximate and can vary slightly from engine
to engine.
Values at Standard Temperature and Pressure.
The P-120SE comes with legendary JetCat quality.
*Note: A flat shipping rate plus the 2% processing fee is added
for orders in the U.S.A. Orders from outside the U.S.A. will incur additional
shipping charges.
Click below to order using your CREDIT CARD via PAYPAL now!