LASER DESIGN SERVICES, LLC
LASER DESIGN SERVICES, LLC
JetCat TITAN SE
JetCat TITAN SE turbine complete with starter includes:
| # 6 lbs more thrust than the P120 # Jet-tronic ECU (fuel control electronics) # GSU (Display and Programmer) # LED I/O board # Miniature fuel pump # Electronic starting gas valve # Electronic Fuel valve # Fuel tubing, tubing connector set, filters, and cable set # 6 cell, 1250mA battery pack # Starting gas tank # Turbine mounting clamp, RamTec compatible # Detailed instruction manual |
Thrust: 34 lbs @ 123,000 RPM
Weight: 3.1 LB
Diameter: 4.4 inches
RPM Range: 32,000 - 123,000 RPM
Exhaust gas temp.: 650°C-770°C
Fuel consumption: 16 oz per/min at full power
Fuel: Jet A1, 1-K kerosene
Lubrication: approximately 5% synthetic turbine oil in the fuel
Maintenance interval: 25 hours
TITAN SE Thrust Chart
RPM Thrust
32,000 1.0
100,000 19.0
105,000 22.0
115,000 28.5
120,000 31.8
123,000 34.0
The values are approximate and can vary slightly from engine
to engine.
Values at Standard Temperature and Pressure.
The TITAN SE comes with legendary JetCat quality.
*Note: A flat shipping rate plus the 2% processing fee is added
for orders in the U.S.A. Orders from outside the U.S.A. will incur additional
shipping charges.
Click below to order using your CREDIT CARD via PAYPAL now!